Skip to content

Damage photographed, insurance steps explained: (559) 524-4544

(559) 524-4544
Technician sanding a gray-primed bumper cover on a rolling stand in a body shop bay, with a cart of tape and sanding discs and an open paint booth behind

ServicesBumper Repair

Bumper Repair in Lemoore

A bumper takes the hit so the rest of your car doesn't. We repair cracks, tears and scuffs when the plastic can be saved, replace it when it can't, and check the absorber, brackets and sensors behind it before we tell you anything.

What Bumper Repair Covers

Most bumpers today are a painted plastic cover over a foam or honeycomb absorber and a metal reinforcement bar. The cover is what you see. The parts behind it are what protect you in the next bump, so we look at all three.

A scuff or a short crack in the cover can usually be repaired and refinished. A torn mounting tab, a crushed absorber or a bent bar means some parts get replaced. We show you which is which and why.

If you plan to file an insurance claim, we take clear photos of the damage as we find it, including what shows up once the cover comes off. That gives you and your adjuster the same picture we have. If the damage reaches past the bumper into the hood, fenders or lights, our collision repair page covers that work.

What's Included in the Repair

Cover off, full look behind it

We remove the bumper cover to check the absorber, reinforcement bar, brackets and clips. A small mark outside can hide a cracked bracket or a pushed-in bar.

Plastic repair when it makes sense

Cracks and tears in the cover can often be plastic-welded or glued from behind with a structural adhesive, then shaped and smoothed. We only do this when the repair will hold and look right.

Replacement parts when it doesn't

Badly torn covers, broken tabs and crushed absorbers get replaced. We tell you what part we plan to use before we order it.

Paint made for flexible plastic

Bumper plastic bends, so the paint has to bend with it. We prep with an adhesion promoter and use a flexible finish so it doesn't flake or crack later. Our paint and refinishing page has more on color matching.

Sensor and light check

Many bumpers carry parking sensors, radar or fog lights. We check that they work and sit right after the repair, and we tell you if a calibration is needed.

Photos for your records

You get photos of the damage before, during and after the repair. They help with an insurance claim and with resale later.

Low-angle view of a woman with a clipboard pointing at grease-pencil marks on a dented gray car's front fender on a body shop lot, open repair bay behind

Signs Your Bumper Needs Work

Gaps or a sagging corner
If one side of the bumper sits lower or pulls away from the fender, a clip or bracket is broken. It can work loose on the highway.
Cracks or splits in the cover
Even short cracks grow with heat, cold and road vibration. Plastic is easier to fix while the crack is small.
Paint peeling or flaking
Flaking paint on a bumper usually means the plastic flexed and the finish let go. Bare plastic fades and weakens in strong sun.
Warning lights or beeping
A parking sensor that beeps nonstop or a driver-assist warning after a bump can mean a sensor got knocked out of place behind the cover.
Any hit above parking-lot speed
Even if the cover popped back out, the absorber behind it may be crushed. It won't protect you the same way next time.

How a Bumper Job Runs

  1. 1

    Start with a phone call

    Tell us what happened and if you're going through insurance or paying on your own. We'll set a time for you to bring your car in.

  2. 2

    Inspect and photograph

    We look the bumper over, take photos and pull the cover if needed to see the parts behind it. Then we write up the estimate line by line.

  3. 3

    Go over the repair-or-replace answer

    We walk you through what we found and what we recommend. If there's a claim, we explain what your adjuster will likely want to see. The adjuster makes the coverage call, not us.

  4. 4

    Repair, refinish, refit

    We fix or replace the parts, paint the cover, and mount it back with proper gaps to the fenders and lights. Sensors and lights get checked before we're done.

  5. 5

    Pickup and walk-around

    We clean the car and walk around it with you so you can see the finished work and the photos.

What Moves the Cost of Bumper Repair

No two bumper jobs price out the same. The biggest question is whether the damage stops at the cover or goes deeper. We give you a written estimate after we see your vehicle, and we call you before doing anything that isn't on it.

Repair versus replace
Fixing a small crack or scuff costs less than a new cover. Deep tears, missing pieces and broken tabs push it toward replacement.
What's behind the cover
A crushed absorber, bent reinforcement bar or broken brackets add parts and labor. We can't know until the cover comes off, which is why we look.
Sensors and electronics
Bumpers with parking sensors, radar or cameras take more time to remove and refit. Some cars need a calibration after the work.
Paint and color
Pearl and three-stage colors take more steps to match. Blending into the fender so the color lines up adds time too.

Bumper Repair Questions

Can my cracked bumper be fixed, or do I need a new one?
It depends on where the crack is and how big. Cracks away from the mounting tabs can often be repaired from behind and refinished. If the tabs are torn off or a piece is missing, replacement is usually the better call. We'll tell you straight after we look.
Should I file a claim for just a bumper?
That's your choice, and it often comes down to your deductible and the size of the estimate. We can give you the estimate first so you have a number to weigh. If you file, our photos and write-up help you show the adjuster what happened. Our insurance claims page explains how we help with the process.
Why does my estimate say parts are hidden or to be checked?
Some damage can't be seen until the cover is off. If we find a cracked bracket or crushed absorber, we photograph it and call you before adding it. If insurance is involved, that's when a supplement goes to the adjuster.
Will the paint match the rest of my car?
We match color to your car's paint code and adjust for fading, then blend where needed. Plastic bumpers get a flexible finish so the paint holds up when the bumper flexes.
How long will you have my car?
A simple scuff or crack repair is shorter than a job that needs parts ordered. We give you a realistic timeline once we know whether we're repairing or replacing, and we keep you posted if a part is delayed.
Gray SUV parked on a wet concrete lot in front of a metal body shop with open bays, a stripped car on the left and a masked car in the paint booth

Get Your Bumper Looked At

Drivers from Lemoore, Hanford and nearby bring their cars to our shop. Call and tell us what happened, and we'll set a time to look at the damage and write up the estimate.