
ServicesDent Repair
Dent Repair in Lemoore
Most dents can come out without new paint. We look at the dent under good light, tell you which method fits and why, and put it in a written estimate. If the paint is cracked or the metal is stretched, we say so before any work starts.
Two Ways to Fix a Dent
Paintless dent repair pushes the metal back from behind the panel with long steel rods, or pulls it from the front with glue tabs. Your factory paint stays on the car. It works best on shallow dents where the paint has not cracked or chipped.
Conventional dent repair is for the rest. We work the metal as close to straight as it will go, apply a thin skim of filler, then prime, paint and blend the panel. It takes longer and costs more, but it is the right fix for sharp creases, edge damage or broken paint.
We pick the method by looking at the dent, not by what is quicker for us. Bring your car to the shop in Lemoore and we will show you what we see.
What the Repair Covers
Inspection under a reflector light
A line board or LED reflector shows the true shape of the dent, including low spots you cannot see in daylight. That tells us how far the metal moved and whether it stretched.
Paint check
We look for hairline cracks and chips around the dent. Cracked paint lets moisture reach bare metal, so a dent with broken paint needs refinishing even if the metal comes back.
Panel access
Some dents need a tail light, door trim or inner liner removed to reach the back of the panel. We take those parts off carefully and put them back with the right clips.
Metal work and finish
For paintless work we massage the dent out in small pushes until the reflection reads straight. For conventional work we shape the metal, fill, sand and refinish, and send it to our Paint and Refinishing side when a full panel blend is needed.
Final look with you
Before you take your car, we walk it with you under the same light we used at the start.
Signs It Is Time to Fix That Dent
Cracked or flaking paint
Even a small dent with a paint crack will start to rust. The sooner it is sealed, the smaller the repair.
A crease along a body line
Dents on the sharp styling lines of a door or fender are harder to fix the longer they sit, and they catch the eye at every angle.
Several marks after a storm or parking lot
A row of door dings or scattered hail marks often comes out paintless in one visit.
A dent near an edge or seam
Damage at the edge of a door, hood or quarter panel can hide a bent inner structure. That is worth a look before it becomes a Collision Repair job.
You plan to sell or trade in
Dealers mark down cars for visible dents. A clean panel usually helps the trade value more than the repair costs.
How a Dent Repair Goes
- 1
Talk it through by phone
Tell us where the dent is, how big it looks and how it happened. We will let you know when to bring your car in.
- 2
Look and estimate
We check the dent under light, look at the paint and note what needs to come off to reach it. You get a written estimate that names the method and lists each step.
- 3
Do the work
Paintless repairs are often handled in a single visit. Conventional repairs need time for filler, primer and paint to cure, so we tell you up front how long your car will be with us.
- 4
Check and hand back
We look at the panel from several angles, reinstall any trim, clean the area and go over the result with you.
What Moves the Price
Dent repair is priced by the dent, not by a flat menu. Two dents the same width can be very different jobs. Here is what we look at when we write the estimate, and we explain each line so nothing is a surprise.
- Size and depth
- A shallow round ding takes far less time than a deep dent with stretched metal. Depth matters more than width.
- Location on the panel
- Dents on body lines, edges or double-walled areas like roof rails are harder to reach and slower to work.
- Panel material
- Aluminum hoods and fenders are stiffer and less forgiving than steel. They need more care and sometimes heat to move without cracking.
- Paintless or conventional
- If the paint is broken, the repair adds filler, primer, paint and blending, which adds materials and cure time.
- Parts to remove
- Lights, trim and liners that come off for access add labor, and the occasional broken clip gets replaced.
Dent Repair Questions
Something not covered here? (559) 524-4544
Will paintless dent repair work on my dent?
It works when the paint is not cracked and the metal is not badly stretched. Most door dings and many hail dents qualify. Sharp creases and edge damage often do not. We will tell you which one yours is after we see it.
Should I file an insurance claim for a dent?
Often a single dent costs less than your deductible, so a claim makes no sense. Hail damage across the whole car is a different story and usually goes through comprehensive coverage. We can photograph the damage and write the estimate so you can decide, and our Insurance Claims page explains the steps.
Will you be able to tell where the dent was?
A good paintless repair is very hard to spot. Some very deep dents leave a faint trace under a strong light, and we will say so before we start if we expect that.
Can you fix dents on an aluminum panel?
Yes, in many cases. Aluminum takes more time and care than steel, and some dents that would come out of steel need conventional repair on aluminum. We check the panel with a magnet and look before we quote.
Do I need to leave my car at the shop?
For a small paintless repair, it may be done the same visit. For conventional work with paint, the car stays while the materials cure. We tell you which to expect when you get the estimate.

Let Us Take a Look at That Dent
Bring your car to the shop and we will tell you straight whether it is a paintless fix or needs paint. Drivers come in from Lemoore, Hanford and Armona.